0 Item(s)
You have no items in your shopping cart.
Showing 47 items
- Price
-
-
-
-
-
-
Toolbox Shelving & Accessories
Order your toolbox shelving and accessories including shelf kits, storage trays, bungee straps, cab organizers, toolbox matting and more at Zips.com today! Other accessories available are rubber straps, drawer dividers, door trim and much, much more. These products are brought to you by B/A Products, Phoenix USA, Buyer’s Product Co. and more!
Your Filters
Clear All
Filter
Sort by
Loading...
Loading...
Dri-Dek 1' x 1' Interlocking Tile
Every year more fleet managers, tradesmen, and fire chiefs outfit their trucks
with Dri-Dek. Why? Because it works. Dri-Dek cushions equipment and when it
gets wet, the raised flow-through surface lets air flow for fast drying. It
stands up to oils, grease, alkalies and solvents. It supports the weight in any
climate without cracking or buckling. Installs in minutes, lasts for years.
Sold by square foot. Also available in 3'x4' Sheets
and 3'x12' Rolls. Complete your area with the Dri-Dek corner and edge pieces to
smooth and round out your full body mat.
$5.89
Zip's Custom Broom or Shovel Holder (Single or Dual)
Please Note: Product Discontinued - ALL SALES FINAL!
Discontinued items are not eligible for return. View Returns Policy
Note: Special Handling Fees Apply for Specific Items
Zip's Custom Broom or Shovel Holders are constructed of Steel and can be painted black or galvanized. These brackets are designed to be installed along side the control compartments of a Miller Industries LCG 12 & 16 Series or 10 Series Car Carriers. They simply bolt to the bottom side of the car carrier sub-frame. A threaded T-handle screws down to hold the broom or shovel securely in place. The 12 & 16 Series custom holder measures 37.5" between the brackets. The 10 Series custom holder measures 33.5" between the brackets. These holders require you to drill through the subframe to install the brackets.
Discontinued items are not eligible for return. View Returns Policy
Note: Special Handling Fees Apply for Specific Items
Zip's Custom Broom or Shovel Holders are constructed of Steel and can be painted black or galvanized. These brackets are designed to be installed along side the control compartments of a Miller Industries LCG 12 & 16 Series or 10 Series Car Carriers. They simply bolt to the bottom side of the car carrier sub-frame. A threaded T-handle screws down to hold the broom or shovel securely in place. The 12 & 16 Series custom holder measures 37.5" between the brackets. The 10 Series custom holder measures 33.5" between the brackets. These holders require you to drill through the subframe to install the brackets.
- Custom built by Zip's
- Choose between the 12 & 16 Series or 10 Series Car Carrier
- Available in Galvanized or Painted finish
- Single or Dual square tubing
- Underside mount
- Subframe drilling required
- Additional Aluminum Mounting Plate not included in kit
| Item # | Size | Finish |
|---|---|---|
| ZP-CBSH-HOLDER | Single - 10 Series | Painted |
| ZP-CBSH-10S-DUAL-G | Dual - 10 Series | Galvanized |
| ZP-CBSH-10S-DUAL | Dual - 10 Series | Painted |
| ZP-CBSH-LCG-G | Single - 12 and 16 Series | Galvanized |
| ZP-CBSH-LCG | Single - 12 and 16 Series | Painted |
| ZP-CBSH-LCG-DUAL-G | Dual - 12 and 16 Series | Galvanized |
| ZP-CBSH-LCG-DUAL | Dual - 12 and 16 Series | Painted |
$63.99–$166.99
In The Ditch Lumber Baskets
These completely redesigned Lumber Baskets from In The Ditch are available in
three different lengths: 48", 60, and 70". All of these baskets are 11"
tall and 8" deep. Mounting is a snap; just bolt the basket to the back of your
tool box with six 5/16" bolts using the pre-drilled holes. In minutes you will
have a great place to store extra lumber, tire chains or anything else that you
can think of. These Lumber Baskets are made from aluminum and they have drain
holes in the bottom that will help them last for decades.
$212.99–$267.99
Zip's Custom Adjustable Toolbox Shelf Kits
Zip's Custom Premium Toolbox Shelf Kits are an easy way to optimize the dead
space in your toolbox on your Tow Truck, Wrecker, or Car Carrier. One of the
many benefits of the premium shelf kits are you get dividers for your shelf to
help keep all of your tools organized. These premium shelf kits get bolted to
the inside of the toolbox. All necessary mounting hardware is included with
these premium shelf kits. They are made from high quality .080" thick aluminum.
These premium shelf kits not only maximize your toolbox storage space, but also
offer a custom look to the inside of your toolbox while on a recovery scene.
$245.70–$360.36
Quantum Storage Systems Stacking Bins - All Sizes and Colors
Use alone or stack together Front, side and back grips for easy handling Reinforced sides prevent spreading High-density, FD-approved polypropylene material holds up under heavy-duty conditions in work truck shops, towing operations and service garages. Won't rust or corrode and is unaffected by weak acids and alkalis. Built-in rear hanger allows bin to hang from louvered panels or racks.
$1.79–$47.29
Zip's Custom Adjustable Half Toolbox Shelf Kits
Zip's Custom Premium Toolbox Half Shelf Kits are an easy way to optimize the
dead space in your toolbox on your Tow Truck, Wrecker, or Car Carrier. One of
the many benefits of the premium half shelf kits are you get dividers for your
shelf to help keep all of your tools organized. These premium half shelf kits
get bolted to the inside of the toolbox. All necessary mounting hardware is
included with these premium half shelf kits. They are made from high quality
.080" thick aluminum. These premium half shelf kits not only maximize your
toolbox storage space, but also offer a custom look to the inside of your
toolbox while on a recovery scene.
$156.00–$259.99
In The Ditch Full/Half Shelf Kit
These Shelf Kits from In the Ditch are available in three different sizes: 48"
60" and 70". Full length shelves will essentially double the useable space inside of your toolbox. Made from aluminum, these shelves are 14" deep.
The shelves actually come as two half shelves with a vertical support, giving you the option to use them as a half shelf or full shelf. All
necessary mounting hardware is included and there is no drilled required
because of they come pre drilled.
$162.99–$257.99
In The Ditch Toolbox Dividers
These In The Ditch Toolbox Dividers are the perfect way to organize your
underbody box. They are made in several different lengths and come with
pre-drilled holes so installation is a snap! Take the time to divide your box
so things stay where they belong and not in one frustrating pile. Toolbox
Dividers come in five different lengths so we will have one for your box. Get
organized today!
$34.99–$43.79
In The Ditch Floor Jack Tray
This Floor Jack Tray from In The Ditch is a perfect solution for storing a
Floor Jack on the deck of a wrecker or inside a Tunnel Box. This Tray has a
13" x 26" tray for the jack and a 3" x 26" Tray for the jack handle
incorporated into one mount.
$153.99
Dri-Dek 3' x 12' Interlocking Roll
Every year more fleet managers, tradesmen, and fire chiefs outfit their trucks
with Dri-Dek. Why? Because it works. Dri-Dek cushions equipment and when it
gets wet, the raised flow-through surface lets air flow for fast drying. It
stands up to oils, grease, alkalies and solvents. It supports the weight in any
climate without cracking or buckling. Installs in minutes, lasts for years.
Sold by 3'x12' Rolls. Also available in 1'x1' Tiles and 3'x4' Sheets. Complete
your area with the Dri-Dek corner and edge pieces to smooth and round out your
full body mat.
$243.99
Zip's Custom Basic Full Toolbox Shelf Kits
Zip's Custom Standard Toolbox Shelf Kits are an easy way to optimize the dead
space in your toolbox on your Tow Truck, Wrecker, or Car Carrier. These
standard shelf kits get bolted to the inside of the toolbox. All necessary
mounting hardware is included with these standard shelf kits. They are made
from high quality .125" thick aluminum. These standard shelf kits not only
maximize your toolbox storage space, but also offer a custom look to the inside
of your toolbox while on a recovery scene.
$155.00–$290.00
Phoenix Smooth Rubber Mat 36", 48", 60" Boxes
These Phoenix rubber mat for toolboxes are smooth on both sides. These rubber mat measures 36",48", or 60"W x 18"D.
$23.99–$41.99
Zip's Custom Car Carrier Shovel or Broom Mount (Old Style)
Please Note: Product Discontinued - ALL SALES FINAL!
Discontinued items are not eligible for return. View Returns Policy
Shovel or Broom mount for car carriers simply bolts to the bottom side of the subframe to store your shovel or broom. Threaded T-handle screws down to hold the tool in place.
* Image shows two ZP-CBSH but these are sold individually
Discontinued items are not eligible for return. View Returns Policy
Shovel or Broom mount for car carriers simply bolts to the bottom side of the subframe to store your shovel or broom. Threaded T-handle screws down to hold the tool in place.
- Image shows two ZP-CBSH but these are sold individually
- For Dual see ZP-CBSH-10S-DUAL or ZP-CBSH-10S-DUAL-G
- LCG versions also availabe
$63.99
Phoenix Adjustable ToolBox Shelf
Phoenix Adjustable ToolBox Shelf made from galvanized steel which can be
installed into virtually any 18" x 18" toolbox in a matter of minutes.
$84.99–$213.99
In The Ditch Wall Shelves
These handy shelves are not only designed to make any shop or garage more organized they just look good to. These shelves are available in 3 different widths and 5 different depths. These shelves can be mounted with a gusset down offering a smooth sleek top surface or you can turn them over for a shelf that has a lip around the top. To make your life easier we include hardware so you can mount this holder to just about anything you want. We also include special peg board screws so you can screw the holder directly to peg boards. The special screws are slightly larger than the peg board hole and work great. They can also be removed and reused so you can move or add racks without destroying your peg board. Each mount is made from Aircraft grad aluminum and come with a
100 lbs. structural load rating. Remember though, it's up to you to make sure you mount them to a surface that can support the load you put on the shelf.
$38.39–$86.99
Norther Factory Sales, Auxiliary Toolbox Heater
This is a Northern Factory Sales auxiliary toolbox heater with 16,000 BTU and
has a high and low speed . It's compact in size 6 3/8 x 6 3/4 x 7 1/2 and is 12
Volts. This versatile heater may be mounted either horizontally or vertically.
Typical locations include floor, wall or under dash. Route the heater hose to
the engine compartment. We recommend the heater hose follow the inside of the
frame rails for protection from road debris.
$234.99
Zip's Custom Toolbox Tray w/ Light Holes
Note: Special Handling Fees Apply for Specific Items
Zip's Custom Toolbox Top Tray with Light Holes. Includes (2) 6" Oval Light Cut-Outs. With Zip's Custom Toolbox Tray you will gain extra storage on top of your toolbox. This tray allows for additional storage for various accessories and tools. This 20" deep tray comes in various sizes to fit on any size under body toolbox you may have on your Tow Truck, Wrecker, or Car Carrier. This tray is made from high quality .125" thick aluminum. Requires hardware for bolt-on installation. 6" Oval Lights Not Included.
Note: Due to size of product, additional handling charges may apply.
Zip's Custom Toolbox Top Tray with Light Holes. Includes (2) 6" Oval Light Cut-Outs. With Zip's Custom Toolbox Tray you will gain extra storage on top of your toolbox. This tray allows for additional storage for various accessories and tools. This 20" deep tray comes in various sizes to fit on any size under body toolbox you may have on your Tow Truck, Wrecker, or Car Carrier. This tray is made from high quality .125" thick aluminum. Requires hardware for bolt-on installation. 6" Oval Lights Not Included.
Note: Due to size of product, additional handling charges may apply.
- Zip's Custom Toolbox Trays
- Has Light Holes
- Gains Extra Storage Space
- Made from High Quality .125" Thick Aluminum
- Tray Lengths: 24" - 120"
- Fits Most Toolboxes on Your Tow Truck, Wrecker, or Car Carrier
Available in the following sizes
Item # Length ZP-TBTA-24 24" ZP-TBTA-36 36" ZP-TBTA-48 48" ZP-TBTA-60 60" ZP-TBTA-70 70" ZP-TBTA-72 72" ZP-TBTA-78 78" ZP-TBTA-84 84" ZP-TBTA-96 96" ZP-TBTA-108 108" ZP-TBTA-120 120"
$260.00–$530.00
Dri-Dek 12" x 2" Interlocking Edge
Every year more fleet managers, tradesmen, and fire chiefs outfit their trucks
with Dri-Dek. Why? Because it works. Dri-Dek cushions equipment and when it
gets wet, the raised flow-through surface lets air flow for fast drying. It
stands up to oils, grease, alkalies and solvents. It supports the weight in any
climate without cracking or buckling. Installs in minutes, lasts for years.
These edges are 12"x2" and are sold individually. Also available in 1'x1'
Tiles, 3'x4' Sheets, and 3'x12' Rolls. Complete your area with the Dri-Dek
corner pieces to smooth and round out your full body mat.
$3.29
Miller Seamless 25' x 4' Toolbox Mats
Note: Special Handling Fees Apply for Specific Items
$1,195.99
In The Ditch GEN 2 Bolt Together ToolBox Top Trays
Introducing the second generation of our toolbox Box Top Tray lineup! These bolt-together Box Top Trays ship and store in a much smaller space. This also allows us to offer replacement parts in case a portion becomes damaged. All these ITD Box Top Trays now come with dividers. Giving you the choice to use them, keep them open, or install them later.
$144.69–$232.39
Miller 36" Saddle Box Shelf Kit (Shelf w/ Divider)
Miller Industries 36" Toolbox Shelf for 36" Tunnel Toolbox (124004137) on
Aluminum Heavy Duty Wrecker Body.
$896.99
Stellar Egg Crate Divider Kit
The Stellar (formerly American Eagle) egg crate divider kit are built to fit Stellar drawer systems.
$23.99–$147.99
Miller 48" Saddle Box Shelf Kit (Shelf w/ 2 Dividers)
Optional 48" Shelf Kit with two dividers for 48" Aluminum Tunnel Toolbox on
aluminum heavy duty wreckers.
$1,043.99
Zip's Custom Basic Half Toolbox Shelf Kits
Zip's Custom Standard Toolbox Half Shelf Kits are an easy way to optimize the
dead space in your toolbox on your Tow Truck, Wrecker, or Car Carrier. These
standard half shelf kits get bolted to the inside of the toolbox. All necessary
mounting hardware is included with these standard half shelf kits. They are
made from high quality .125" thick aluminum. These standard shelf kits not only
maximize your toolbox storage space, but also offer a custom look to the inside
of your toolbox while on a recovery scene.
$100.00–$160.00
Dri-Dek 3' x 4' Interlocking Sheet
Every year more fleet managers, tradesmen, and fire chiefs outfit their trucks
with Dri-Dek. Why? Because it works. Dri-Dek cushions equipment and when it
gets wet, the raised flow-through surface lets air flow for fast drying. It
stands up to oils, grease, alkalies and solvents. It supports the weight in any
climate without cracking or buckling. Installs in minutes, lasts for years.
Sold by 3'x4' Sheets. Also available in 1'x1' Tiles and 3'x12' Rolls. Complete
your area with the Dri-Dek corner and edge pieces to smooth and round out your
full body mat.
$84.99
Miller 2002 Aluminum Body Shelf Kit
This Miller Industries shelf kit includes 3 adjustable shelves.
$720.99
Zip's Custom Freightliner M2's Center Console Floor Toolbox
Zip's custom center console floor toolbox is designed specifically for
Freightliner M2's. It has the ability to store a 2.8 oz. or 5lb. fire
extinguisher, TM22G 22" wireless light bar, J & C 660 and other similar jump
packs, and a Milwaukee impact and charging station. Truck Freight Ship Direct Only
$475.00
Miller Seamless 12.5' x 4' Toolbox Mats
These Seamless Toolbox Mats by Miller Industries are a great addition to your
toolbox to get that great custom look. Not only do they look amazing but they
are also very functional. These mats will help keep your towing tools and
accessories from sliding around and scratching and damaging the inside of your
toolbox. These mats are 12.5' long by 4' wide and are available in 5 different colors.
They are available in: Black, Blue, Yellow, Red, and Green.
$676.99
Dri-Dek 2" x 2" Interlocking Corner - Pack of 4
Every year more fleet managers, tradesmen, and fire chiefs outfit their trucks
with Dri-Dek. Why? Because it works. Dri-Dek cushions equipment and when it
gets wet, the raised flow-through surface lets air flow for fast drying. It
stands up to oils, grease, alkalies and solvents. It supports the weight in any
climate without cracking or buckling. Installs in minutes, lasts for years.
These corners are 2"x2" and are sold as a pack of 4. Also available in 1'x1'
Tiles, 3'x4' Sheets, and 3'x12' Rolls. Complete your area with the Dri-Dek edge
pieces to smooth and round out your full body mat.
$7.59
Phoenix SS Dress Plate
Phoenix Stainless Steel Dress Plate for Top-Mount Tray ToolBox.
$41.99–$72.99
In the Ditch 4-Hole Aluminum Wall Hooks
These aluminum wall hooks from In the Ditch are a versatile and easy option to organize your truck, shop, garage, or trailer. These hooks are offered in 3", 5" and 7" lengths. The heavy duty aluminum alloy construction gives these hooks a structural rating of 100 lbs. Mounting options are nearly endless including pegboard, drywall, and any other flat surface. All of the necessary hardware is included to make installation quick and easy.
$20.99–$22.19
In The Ditch 16" Storage Tray
This 16" Storage Tray from In The Ditch is perfect for storing just about
anything. It comes with 6 slots and 4 moveable snap in dividers. It is great
for separating and storing screws, nuts, and fittings.
$57.99
CTech 2" Toolbox Risers Kit
These are C Tech Manufacturing drawer system 2" Risers. They help give your box
that extra bit of height to clear door openings and give you full access to
that botom drawer.
$68.99–$97.99
Zip's T-Slotted Aluminum Track 48"
Slide 1/4"-20 hex head bolts anywhere along the slotted track for use as
hangers. Bolts are sold separately. T-slotted track is also used to position
clamps and jigs on workbenches and table saws. Track is clear-anodized
aluminum. Mounting holes are on 3" centers and require No. 8 pan head screws.
$43.69
Zip's 17" Deep Shelf Kit Divider
This is a 17" shelf divider for 17" deep shelf kits offered by Zip's Truck Equipment. This divider is sold as each.
$6.67
Miller Tunnel Box Shelf Kit
This Tunnel Box Shelf Kit from Miller Industries is for a 30" Tunnel Box.
Chains, rack, and attachments are all sold separately.
$1,097.99
Miller Shelf Kit Composite 810/807
Shelf Kit for FI & 6500 Century as well as Vulcan 880/890 Series.
$277.99
RC Industries Smooth Aluminum Unassembled Box Top Tray
This is RC Industries .100 smooth aluminum unassembled toolbox box top tray.
$168.99–$215.99
Buyers Aluminum Step Toolbox 24" x 28" x 18"
Built for medium to heavy duty trucks, Buyers Products Heavy Duty Diamond Tread
Aluminum Step Box provides framed steps with convenient built-in storage space.
The durable design incorporates a smooth aluminum body with a diamond tread
aluminum door for great stability and looks. A die cast, locking T-latch and
single rubber D-bulb door seal help keep your tools protected from weather and
theft. Corner gussets and a continuous hinge on the door opening provide extra
strength. Available in multiple sizes to suit a variety of applications.
$632.99
Stellar Drawer Light Bar Kit
This is a light bar for the Stellar (formerly American Eagle) drawer systems. There are three
different options to choose from. When ordering these light please use the
drawer width to assure to purchase the right fit for your drawer system.
$95.99–$142.99
Quantum Storage System Black Bin Divider
Dividers maximize flexibility and keep contents organized.
$15.86
Filter
1 - 47 of 47 items
